Box Contents
Box 1: Compressed roll with two mattress core quadrants
Box 2: Compressed roll with two mattress core quadrants
Box 3: One compressed foam topper and one mattress shell
Setup Instructions
Excited to unpack your new bed? Follow the steps below for fast and easy assembly! Just remember to exercise caution while lifting, positioning, and unwrapping your mattress components. We recommend two adults complete the setup process.
Step 1:
Open all three boxes and remove their contents. Leave each component in its individual packaging for now.
Step 2:
Unwrap the mattress shell and unzip it to separate the top panel and fabric border. Set the top panel aside for later and spread the fabric border out on top of your foundation. Make sure the four corners line up with the base.
Step 3:
Start with one of the mattress rolls and place it on the ground. Note that the plastic roll contains two quadrants stacked on top of each other and then compressed. Make sure there's enough space for them to fully unravel before opening the plastic—once air enters the wrap, the mattresses will expand quickly and may exert force. Carefully cut the plastic wrap, and let the mattresses unroll and expand until they lay flat.
Step 4:
Lift one of the mattress quadrants and place it on top of your foundation within the fabric border. Then, line it up in one of the four corners of the bed. Do the same with the second quadrant; the order does not matter, as all the quadrants are identical.
Step 5:
Repeat steps 3 and 4 with the remaining mattress core quadrants. Together, they’ll create a 108-inch by 108-inch square.
Step 6:
Grab the mattress topper roll and position it on top of the mattress core quadrants. Be prepared for the roll to unravel and carefully cut the plastic wrap. Once the topper lays flat, discard the plastic and line the topper up with the quadrants so they meet in all four corners. Ensure the word “Medium” printed on the topper is right side up.
Step 7:
Now take the top panel from the mattress shell. With the backing facing downward, line it up and lay it flat on top of the mattress topper.
Step 8:
Pull up the border fabric so it covers the bed's edges. To secure the top panel, zip it to the top edge of the border fabric all around the mattress perimeter.
That's It!
Give the mattress a few hours to fully expand, then enjoy the royal treatment of an Alaskan King size bed.